Boeing-Stearman Kaydet Engineering Drawings Archive
Complete searchable archive of 7,259 digitized Boeing-Stearman engineering drawings, originally created by the Stearman Aircraft Company in Wichita, Kansas. These drawings cover every frame designation (A through N) plus service manual illustrations.
Drawing Categories
- A FRAME DRAWINGS — 550 engineering drawings
- B FRAME DRAWINGS — 550 engineering drawings
- C FRAME DRAWINGS — 550 engineering drawings
- D FRAME DRAWINGS — 550 engineering drawings
- E FRAME DRAWINGS — 551 engineering drawings
- F FRAME DRAWINGS — 537 engineering drawings
- G FRAME DRAWINGS — 552 engineering drawings
- H FRAME DRAWINGS — 551 engineering drawings
- J FRAME DRAWINGS — 551 engineering drawings
- K FRAME DRAWINGS — 550 engineering drawings
- L FRAME DRAWINGS — 544 engineering drawings
- M FRAME DRAWINGS — 547 engineering drawings
- N FRAME DRAWINGS — 538 engineering drawings
- Service Manual — 138 engineering drawings
Sample Drawings (AI-Analyzed)
Each drawing has been analyzed by AI to identify parts, assemblies, drawing numbers, and readable text.
A FRAME DRAWINGS(453).tif
Category: A FRAME DRAWINGS
1. Description: This engineering drawing depicts a single aircraft part, specifically a casting for a "CASTING- SHAFT BEARING". It shows multiple views of the part with detailed dimensions and specifications for its manufacturing. The material is specified as "ALUM ALLOY #11309".
2. Drawing Numbers: 75-3902
3. Title Block:
Company Name: STEARMAN AIRCRAFT C.O.
Location: WICHITA
Dates: 10-23-35, 12-16-35, 12-16-35
Approval Signatures: MCDOWELL (Drawn By), DAL (Checked By), 12-16-35 (Date of Appr
View Drawing
B FRAME DRAWINGS(130).tif
Category: B FRAME DRAWINGS
1. DESCRIPTION:
This engineering drawing depicts a "CLIP - Aileron Bellcrank Insp. Door" for a Boeing-Stearman aircraft. It details the dimensions, hole locations, and material specifications for this specific part. The drawing shows several views of the clip, including a main profile with various measurements and detail views illustrating hole placements and edge treatments. It appears to be a sheet metal component with bends and drilled holes for assembly.
2. DRAWING NUMBERS:
7603-1207
7603-1
View Drawing
A FRAME DRAWINGS(214).tif
Category: A FRAME DRAWINGS
Description: This engineering drawing depicts a "CLIP-VENTURI ATTACHMENT" for a Boeing-Stearman biplane. It shows two main components: a rectangular bracket with two holes and a streamlined venturi tube formed over a round steel tube. Dimensions and material specifications are provided for both parts. The drawing includes a title block with company information, approval signatures, dates, and revision details.
Drawing Numbers:
73-3816
NS-1 73-3800
E.O. #3166
214
73-3A
Title Block:
Company Name
View Drawing
B FRAME DRAWINGS(080).tif
Category: B FRAME DRAWINGS
1. DESCRIPTION:
This drawing depicts a stud used in the cockpit enclosure roller assembly of a Boeing-Stearman aircraft. It shows detailed dimensions, material specifications, and manufacturing notes for the stud. The drawing also includes a parts list entry for the stud and its associated part numbers.
2. DRAWING NUMBERS:
D75 N1-4718
PT-27 D75 N1-4726
PT-27 D75 N1-4712
104 15-8526
3. TITLE BLOCK:
Company Name: BOEING AIRPLANE COMPANY
Division: WICHITA DIVISION
Location: KANSAS
Dates: 8-22-42
View Drawing
B FRAME DRAWINGS(091).tif
Category: B FRAME DRAWINGS
1. Description:
This drawing shows a detailed engineering illustration of an Aileron Control Horn Reinforcement plate for a Boeing-Stearman aircraft. It includes dimensions for the part's geometry and a note regarding an alternate material specification. The drawing is part of a larger assembly context, indicated by the table in the title block.
2. Drawing Numbers:
E75-3313
E75-3311-1 (listed in the title block table)
3. Title Block:
Company Name: BOEING AIRPLANE COMPANY
Location: WICHITA DIVI
View Drawing
A FRAME DRAWINGS(542).TIF
Category: A FRAME DRAWINGS
1. Description: This drawing shows a flanged exhaust port, specifically for a Continental W670 Series 6 engine. It details the dimensions and specifications of the flange, including hole sizes, chamfers, and overall material. It appears to be a single component drawing.
2. Drawing Numbers:
A75N1-5602
A75N1-56
3. Title Block:
Company Name: STEADMAN
Date: 10-12-39
Approval Signatures: A handwritten signature and what appears to be a date "0769" are visible. Another signature is partially obscure
View Drawing
A FRAME DRAWINGS(177).tif
Category: A FRAME DRAWINGS
Here's an analysis of the provided Boeing-Stearman biplane engineering drawing:
1. **Description**: This drawing depicts a bracket assembly, specifically the "PARKING BRAKE HANDLE SUPPT. REAR". It shows the main bracket component with dimensions for mounting holes (reamed to .196-.194 inches) and other features. It also illustrates how two "TUBE" components, identified by part numbers, are attached to the bracket using an "AN 740 CLAMP". The overall assembly is for a Boeing-Stearman aircraft.
View Drawing
A FRAME DRAWINGS(382).tif
Category: A FRAME DRAWINGS
Description: This engineering drawing shows a detailed view of a single aircraft part, specifically a "WASHER - ANTI RATTLE". It includes multiple views of the washer, including a front elevation, side elevation, and an "ACTUAL SIZE" view. The drawing also contains a title block with manufacturing and approval information.
Drawing Numbers:
75-3452
PT-15 75-3400
PT-15 75-3400
Title Block:
Company Name: STEARMAN AIRCRAFT CO.
Location: WICHITA, KANSAS
Drawing Number: 75-3452
Dates: 8-19-36 (DRN.
View Drawing
A FRAME DRAWINGS(243).tif
Category: A FRAME DRAWINGS
1. Description:
This engineering drawing depicts a metal part, likely a component for a Boeing-Stearman biplane. It shows the detailed geometry of the part, including bends and drilled holes, with specific dimensions and tolerances. The drawing also indicates the manufacturing process ("H.T. AFTER FORMING") and a note regarding edge finishing. The right side of the drawing shows the primary view of the part with several features, while the left side shows a different configuration of the same pa
View Drawing
B FRAME DRAWINGS(203).tif
Category: B FRAME DRAWINGS
DESCRIPTION:
This drawing is an engineering detail drawing for a part identified as a "CLIP - BRAKE FLEX. TUBE SUPPORT". It shows multiple views of the part, including its shape, dimensions, and features such as drilled holes and a bend. The material specification and dimensions are clearly indicated. The drawing is part of a larger system for the Stearman Aircraft Company.
DRAWING NUMBERS:
76C3-3410
76C3-3405-1
76C3-3405
TITLE BLOCK:
Company Name: STEA RMAN AIRCRAFT CO.
Location: WICHITA, KAN
View Drawing
B FRAME DRAWINGS(067).tif
Category: B FRAME DRAWINGS
Here is an analysis of the provided engineering drawing:
1. **Description**:
This drawing shows a circular plate intended for an instrument light rheostat. It details the plate's dimensions, hole specifications, material, and finishing notes. It also includes a revision history and information about an alternate material. The drawing is for a Boeing-Stearman aircraft component.
2. **Drawing Numbers**:
* B75N1-3904 (Primary drawing number)
* B75N1-3910 (Part number it can be i
View Drawing
`SERVICE MANUAL(002.050).tif
Category: Service Manual
1. Description:
This drawing is a parts list or index for the Boeing-Stearman biplane, specifically focusing on the control systems and related components, likely for the horizontal stabilizer (TAB) and the pilot's seat. It lists various parts such as cable assemblies, pulleys, castings, forgings, and fittings, along with their associated drawing numbers. The drawing also indicates assembly groups and units.
2. Drawing Numbers:
D3-1525 (Group or Unit, Dwg. No.)
75-3516 to 75-3543 (Part Numbers,
View Drawing
A FRAME DRAWINGS(396).tif
Category: A FRAME DRAWINGS
DESCRIPTION:
This engineering drawing depicts the design of a "REAR TAB CONTROL PULLEY" for a Boeing-Stearman aircraft. It includes detailed orthographic views (front, side, and section views) of the pulley, illustrating its dimensions, radii, and angles. The drawing specifies the material as "ALUM ALLOY 57-12 CASTING GRADE 5". The drawing also shows how the part is to be manufactured, including specific tolerances and radiuses.
DRAWING NUMBERS:
75-3523
PT-13 75-3524
TITLE BLOCK:
COMPANY NAME:
View Drawing
A FRAME DRAWINGS(474).tif
Category: A FRAME DRAWINGS
DESCRIPTION:
This engineering drawing depicts an H-shaped extrusion intended for use as a spar in the construction of a Boeing-Stearman biplane. It provides detailed dimensions for the extrusion profile at twice its actual size, along with a representation of the actual-sized profile. Instructions are given for ordering the material, specifying the need to provide material type and length.
DRAWING NUMBERS:
75-5610
TITLE BLOCK:
Company Name: STEARMAN AIRCRAFT CO.
Location: WICHITA KANSAS
Date:
View Drawing
B FRAME DRAWINGS(189).tif
Category: B FRAME DRAWINGS
Description: This drawing depicts the engineering details of a clamp assembly for a fuel line, specifically the lower right section of a Boeing-Stearman biplane. It illustrates the configuration of various components including rivets, a brace, a clamp, a support, and a latch, along with their connections. The drawing also includes dimensional information and specifications for the assembly.
Drawing Numbers:
76C3-3128
76C3-3133
76C3-3132
76D1-3148
76C3-3126
76C3-76C3-3100
Title Block:
Company N
View Drawing
B FRAME DRAWINGS(049).TIF
Category: B FRAME DRAWINGS
DESCRIPTION:
This drawing depicts a reflector for an instrument panel light on a Boeing-Stearman aircraft. It includes detailed dimensions and callouts for manufacturing, as well as information about revisions, material, and finishing. The drawing also shows various views and sections of the reflector.
DRAWING NUMBERS:
B75-3820
TITLE BLOCK:
Company Name: Stearman Aircraft, Division of Boeing Airplane Company
Dates: 10-14-40, 10-10-40, 10-23-40, 11-8-43, 4-1-43, 2-16-41, 2-14-41
Approval Signat
View Drawing
A FRAME DRAWINGS(272).tif
Category: A FRAME DRAWINGS
1. Description:
This engineering drawing depicts a forged component, likely a fitting for a Boeing-Stearman biplane. The main view is a top-down representation of the part's shape, with various dimensions and radii indicated. There is also a cross-sectional view showing the thickness and potentially the profile of the fitting. The drawing specifies that the part is to be annealed according to a specific specification. Two conditions are noted: "-1) AS SHOWN WITH PUNCHED HOLE" and "-2) SAME AS (-
View Drawing
A FRAME DRAWINGS(128).tif
Category: A FRAME DRAWINGS
DESCRIPTION:
This is an engineering drawing of a stud used as a spacer attachment. It details the dimensions, threading, chamfering, and drilling of the stud. The drawing also includes a title block with company information, dates, and approval signatures.
DRAWING NUMBERS:
73-2855
NS-1 73-2850 4
TITLE BLOCK:
COMPANY NAME: Stearman Aircraft Co.
LOCATION: Wichita, Kansas
DATES: 7-15-36, 1-30-36
APPROVAL SIGNATURES: Dal (appears to be an initial or shorthand signature)
SHEET INFO: Full Size A, 12
View Drawing
B FRAME DRAWINGS(188).tif
Category: B FRAME DRAWINGS
DESCRIPTION:
This drawing depicts an assembly of a clamp for a fuel line on a Boeing-Stearman aircraft. It details the various components, including rivets, a brace, a clamp body, a latch, and a support, along with their part numbers and identifying labels. The overall assembly is designated as "CLAMP ASSEMBLY - FUEL LINE LOWER LEFT".
DRAWING NUMBERS:
76C3-3125
76C3-3132
76C3-3127
76C3-3133
76D1-3148
76C3-3100
TITLE BLOCK:
COMPANY NAME: STEARMAN AIRCRAFT CO.
LOCATION: WICHITA, KANSAS
DRAWN BY:
View Drawing
`SERVICE MANUAL(002.113).tif
Category: Service Manual
1. DESCRIPTION:
This engineering drawing is a parts list for a Boeing-Stearman biplane. It details various components, primarily lines, clamps, and fittings related to the fuel and oil systems. The list includes drawing numbers, part numbers, and descriptive names for each item.
2. DRAWING NUMBERS:
7603-3021, 7603-3022, 7603-3023, 7603-3024, 7603-3025, 7603-3026, 7603-3027, 7603-3028, 7603-3029, 7603-3030, 7603-3035, 7603-3100, 7603-3101, 7603-3102, 7603-3103, 7603-3104, 7603-3105, 7603-3106, 7
View Drawing
`SERVICE MANUAL(002.107).tif
Category: Service Manual
1. Description: This drawing is a parts list for the Boeing-Stearman biplane, specifically detailing various components, assemblies, and installations. It includes drawing numbers, part names, and sometimes brief descriptions of their function or application. The drawing is organized into columns for drawing number, drawing sheet, revision, film index, and part name.
2. Drawing Numbers:
76-4502, 76-5509
76-5543, 76-5545, 76-5546, 76-5547, 76-5548, 76-5549, 76-5550, 76-5554
76-5555, 76-5556, 76-
View Drawing
B FRAME DRAWINGS(223).tif
Category: B FRAME DRAWINGS
DESCRIPTION:
This engineering drawing depicts a clamp assembly for a cord attachment, specifically for a Boeing-Stearman biplane. It shows two views of the clamp assembly: a left view and a right view. The assembly consists of a clamp and a loop. Detailed dimensions and material specifications are provided for the loop, which is made of steel rod. The drawing also includes a title block with company information, dates, approval signatures, and sheet details, as well as a section for revision his
View Drawing
B FRAME DRAWINGS(239).tif
Category: B FRAME DRAWINGS
DESCRIPTION:
This drawing depicts an instrument light identification plate for a Boeing-Stearman biplane. It details the physical dimensions, features such as punch marks and holes, and textual elements including translation for the labels. The title block indicates it is a product of Stearman Aircraft Co.
DRAWING NUMBERS:
76C3-3914 (Plate number)
76C3-3922 (Part number)
76C3-3916 (Part number)
TITLE BLOCK:
Company Name: STEARMAN AIRCRAFT CO.
Location: WICHITA KANSAS
Dates: 12-7-36 (Likely a r
View Drawing
A FRAME DRAWINGS(238).tif
Category: A FRAME DRAWINGS
1. DESCRIPTION:
This engineering drawing shows a circular plate with a central hole and two smaller holes, likely for mounting or fastening. The plate is identified as an "AUXILIARY AILERON STOP." The drawing includes detailed dimensions for the plate's diameter, thickness, and the location and size of the holes. It also specifies the material and finish.
2. DRAWING NUMBERS:
75-1238
PT-13A 75-1201-6
PT-13A 75-1201
PT-13 75-1201
PT-13 75-1201-H
3. TITLE BLOCK:
Company Name: STEARMAN AIRCRAFT CO
View Drawing
A FRAME DRAWINGS(532).TIF
Category: A FRAME DRAWINGS
1. Description: This drawing appears to be a detail drawing of a "PLASTIC FLUID IDENT. TAG" for a Boeing-Stearman aircraft. It shows the dimensions, material specifications, and some manufacturing notes for the tag. The tag is intended to be used for fluid identification and has specific instructions for its appearance and dimensions.
2. Drawing Numbers:
A75NI-3421 (This appears to be the main drawing number for the tag itself)
73-3490 (Referenced as superseded by this part)
PT-17 3340-1
PT-17
View Drawing
B FRAME DRAWINGS(077).tif
Category: B FRAME DRAWINGS
1. Description:
This engineering drawing depicts a "HOLDER ASSY. CORRECTION CARD". It shows a main assembly with a central cutout and four mounting holes. Two callout lines indicate a "CASE" and a "COVER" with associated part numbers (AN 5800-2 and AN 5800-3 respectively). Another callout describes a #38 (101) diameter counterbore hole with a 82-degree countersink and a 1/64 diameter hole, to which an additional hole is to be added. The drawing includes a detailed title block with information ab
View Drawing
A FRAME DRAWINGS(481).tif
Category: A FRAME DRAWINGS
1. Description:
This drawing shows a comparison between an "ORIGINAL DESIGN" and a "NEW METHOD" for attaching a rear rocker box cowl support lug on a Boeing-Stearman biplane. The original design involves welding a washer to a rod to allow for adjustment, while the new method uses a threaded rod with an AN nut and AN washer for attachment.
2. Drawing Numbers:
75-5780
75-2855
75-5781
3. Title Block:
Company Name: STEAMBOAT AIRCRAFT CO. (WICHITA, KANSAS is also visible)
Dates: 1-4-38, 1-24-37 (re
View Drawing
`SERVICE MANUAL(002.067).tif
Category: Service Manual
DESCRIPTION: This engineering drawing is a Bill of Material (BOM) or parts list for a Boeing-Stearman biplane. It details various components, assemblies, and systems related to the aircraft's engine, fuel, electrical, and control systems. The drawing is organized by drawing number, revision, and part name.
DRAWING NUMBERS:
A75L5-2800 through A75L5-2907
A75L5-3100 through A75L5-3103
A75L5-3800 through A75L5-3801
A75L5-3900 through A75L5-3904
M-191, M-192, M-193, M-194, M-195, M-196, M-197, M-198
View Drawing
A FRAME DRAWINGS(381).tif
Category: A FRAME DRAWINGS
1. Description:
This drawing depicts a single part, a "WASHER-SAFETY LUG," made of soft copper. It includes detailed dimensions for its shape, a small tab that needs to be bent up for assembly, and a drilled hole. A smaller, "ACTUAL SIZE" view is also provided for reference. The part is designed to be fitted onto an assembly.
2. Drawing Numbers:
75-3450
PT-13 75-3440-1
PT-13 75-3440
3. Title Block:
Company Name: Stearman Aircraft Co.
Location: Wichita, Kansas
Dates: 8-20-36 (Drawn by), 8-24-36
View Drawing
A FRAME DRAWINGS(188).tif
Category: A FRAME DRAWINGS
1. Description
This drawing depicts a SHAFT-FLAP CONTROL HANDLE KNOB, a component of a Boeing-Stearman biplane. It shows the detailed dimensions, material specifications, and threading of the part.
2. Drawing Numbers
73-3509
NS-1 TB-3507 (MODEL/ASSY. NO.)
3. Title Block
Company Name: STEARMAN AIRCRAFT CO.
Location: WICHITA KANSAS
Dates: 2-1-35, 3-12-35, 3-12-35
Approval Signatures: J.J.C. (CHK. BY), H.G. (TRAC. BY), D.A.L. (DRN. BY), G. (APP.)
Sheet Information: There is a scale noted as "FULL
View Drawing
A FRAME DRAWINGS(082).tif
Category: A FRAME DRAWINGS
DESCRIPTION: This drawing depicts a spring-like component designed as a "Shock Absorber Lock" for an aircraft. It shows the physical dimensions, material specifications, and manufacturing details of this part. The drawing also includes information about its origin, part numbers, and revision history.
DRAWING NUMBERS:
73-2636
A-4897
SP 268-B
73-2602
73-2601
NS-1
TITLE BLOCK:
Company Name: STEARMAN AIRCRAFT CO.
Location: WICHITA, KANBAS
Dates: ISSUE DATE 10-20-35
Approval Signatures: R.K.K. CUR
View Drawing
`SERVICE MANUAL(002.137).tif
Category: Service Manual
1. Description
This drawing is a numerical index sheet for a Boeing-Stearman biplane. It lists various assemblies and parts with their corresponding drawing numbers. The sheet is part of a larger set of drawings, as indicated by the sheet number. It appears to be a list of sub-assemblies and their associated part numbers for the aircraft.
2. Drawing Numbers
D3-1525-3 (Group or Unit Dwg. No.)
B76C3-4221
B76C3-4222
B76C3-4223
B76C3-4516
B76C3-4900
B77B4-2319
K-446
C-16
C-17
K-447
P-58
H-167
3. T
View Drawing
B FRAME DRAWINGS(038).TIF
Category: B FRAME DRAWINGS
1. Description:
This drawing shows a detailed engineering view of a "LINE ASSY - #5 CO2 OUTBOARD DISCHARGE" for a Boeing-Stearman aircraft. It depicts the assembly of a tube with fittings, including a sleeve and a nut. The drawing specifies material, dimensions, and other manufacturing details.
2. Drawing Numbers:
B75-3624
N25-3 B75N1-3601
N25-2 B75N1-3601
3. Title Block:
Company Name: STEPMAN AIRCRAFT
Location: WICHITA, KANSAS
Dates: 1-2-41 (likely drawing date), 1-2-41 (drawing revision date
View Drawing
A FRAME DRAWINGS(241).tif
Category: A FRAME DRAWINGS
Here's an analysis of the provided engineering drawing:
Description:
This drawing depicts a metal component for a Boeing-Stearman aircraft, specifically identified as a "LUG - UPPER FRONT LANDING WIRE." It shows the shape, dimensions, and manufacturing specifications for this part, including material, heat treatment, and drilling locations.
Drawing Numbers:
75-1341
PT-13 76-1301
57-130-8
Title Block:
Company Name: STEARMAN AIRCRAFT CO.
Location: WICHITA, KANSAS
Dates: 11-21-35 (DRN. BY), 11-2
View Drawing
B FRAME DRAWINGS(051).TIF
Category: B FRAME DRAWINGS
1. DESCRIPTION: This engineering drawing is a checklist for the take-off procedure of the Boeing-Stearman Model NES-2 and NES-3 aircraft. It includes a step-by-step list of pre-flight checks, system checks, and operational parameters. A title block indicates it is a "CARD CHECK LIST" for the Stearman Aircraft Division of Boeing Airplane Company.
2. DRAWING NUMBERS: B75-3825
3. TITLE BLOCK:
Company Name: Stearman Aircraft, Division of Boeing Airplane Company
Dates: Various dates visible includi
View Drawing
A FRAME DRAWINGS(307).tif
Category: A FRAME DRAWINGS
DESCRIPTION:
This engineering drawing shows a single part, likely a washer or shim, with specific dimensions and surface finish requirements. It indicates that this part has been replaced by a new specification and is the same as a Bendix part. The drawing also includes a table listing various parts and their associated numbers, materials, quantities, and revision information, pertaining to Stearman Aircraft.
DRAWING NUMBERS:
175-2740 (likely a drawing or part number)
AN 301-5C (new part specif
View Drawing
A FRAME DRAWINGS(028).tif
Category: A FRAME DRAWINGS
1. Description: This engineering drawing depicts the construction and specifications for a "Bracket-Aileron Hinge" for a Boeing-Stearman aircraft. It shows detailed views of the bracket itself, including dimensions, material callouts, and fabrication instructions like drilling, chamfering, and bending. A separate view illustrates a "Washer" with its specifications. A bill of materials section lists associated parts and their quantities.
2. Drawing Numbers:
73-1416
76D1-1401
73-1417
73D1-1401
T3
View Drawing
B FRAME DRAWINGS(072).tif
Category: B FRAME DRAWINGS
DESCRIPTION:
This engineering drawing depicts a vent assembly for a fuel tank on a Boeing-Stearman aircraft. It details a specific tube with a reducer fitting at one end. The drawing includes a title block, material specifications, dimensions, and revision information.
DRAWING NUMBERS:
D75N1-3610 (Main drawing number)
PT-27 D75N1-3600 (Model/Assembly number in table)
PT-27 104 (Model/Assembly number in table)
75-8526 (Part number in table)
TITLE BLOCK:
Company Name: BOEING AIRPLANE COMPANY
Loc
View Drawing
B FRAME DRAWINGS(088).tif
Category: B FRAME DRAWINGS
Here's an analysis of the provided engineering drawing:
1. **Description**:
This drawing details a specific part for a Boeing-Stearman aircraft, identified as an "ADAPTER - FUEL GAGE". It shows the mechanical design, dimensions, and features of this adapter. The drawing includes a top view with various diameter callouts and hole specifications, a side view illustrating the threading and chamfering, and notes regarding interchangeability and material specifications. It also includes a table
View Drawing
A FRAME DRAWINGS(515).tif
Category: A FRAME DRAWINGS
Here's an analysis of the provided engineering drawing:
1. **Description**: This drawing shows a mechanical part, identified as a "RING STARTER CRANK EXTENSION STEP." It includes two views: a front view and a sectional view (A-A). The part is circular with an inner hole and appears to be a flange or spacer with threaded holes. Dimensions and manufacturing specifications are provided.
2. **Drawing Numbers**:
* A75NI-2848
* A75NI-2848 (in title block)
* PT17 A5N1-2609 (Model
View Drawing
A FRAME DRAWINGS(353).tif
Category: A FRAME DRAWINGS
Description: This engineering drawing depicts a plate assembly for the fuel tank end support of a Boeing-Stearman aircraft. It details a specific plate component, its material specifications, and its assembly with a felt pad. The drawing includes various views and cross-sections to illustrate the geometry and manufacturing requirements.
Drawing Numbers:
75-3154
73-1000 (implied by "73-1000" within the title block's revision history, though not directly a part number on the drawing)
PT-13A 75-31
View Drawing
A FRAME DRAWINGS(370).tif
Category: A FRAME DRAWINGS
Description:
This drawing depicts a seal for an aileron control link bearing. It includes a sectional view and a top view of the seal, along with dimensional callouts. A table provides material specifications, part numbers, and quantity information.
Drawing Numbers:
PT13A 75-3301-1
PT13A 75-3301
Title Block:
Company Name: STEARMAN AIRCRAFT
Location: WICHITA, KANSAS
Dates: 9-7-39 (Dan. By)
Approval Signatures: Not clearly legible, but includes 'APP.', 'ARMY APP', 'NAVY APP'
Sheet Information: S
View Drawing
`SERVICE MANUAL(002.100).tif
Category: Service Manual
1. Description: This drawing is a parts list for a Boeing-Stearman biplane, specifically detailing components of the shock strut and landing gear systems. It lists drawing numbers, part names, and some associated codes like "SIZE," "DWG. SHT.," "REVISION," and "FILM INDEX."
2. Drawing Numbers:
E75N1-2612 through E75N1-2656
H-324, E-532, E-533, E-534, E-535, E-536, E-537, E-538, H-325, E-539, K-265, E-540, H-326, H-327, H-328, E-541, E-542, E-543, E-544, E-545, E-546, E-547, H-330, H-331, K-266,
View Drawing
`SERVICE MANUAL(002.014).tif
Category: Service Manual
1. DESCRIPTION:
This is an engineering drawing that lists parts and assemblies for a Boeing-Stearman biplane. It appears to be a parts list or index for a specific section of the aircraft's control systems, primarily focusing on the aileron and rudder/brake control mechanisms. The drawing includes a table with columns for Drawing Number, Drawing Sheet, Revision, Film Index, and Part Name. It details various components such as control assemblies, bearing housings, tubes, links, bellcranks, pedals
View Drawing
A FRAME DRAWINGS(320).tif
Category: A FRAME DRAWINGS
1. DESCRIPTION
This engineering drawing depicts a "HANDLE - BOOSTER MAGNETO CONTROL" for a Boeing-Stearman aircraft. It shows two views of the part, likely a casting, with detailed machining instructions. The drawing illustrates drilling, spot facing, and the removal of rough projections. It also includes a bill of materials or part listing, indicating different configurations or revisions of the part.
2. DRAWING NUMBERS
75-2830
75-2829 (Casting No.)
NSZ-1 75-2862
PT-1B 75-2862
PT-17 75-2862
PT
View Drawing
A FRAME DRAWINGS(139).tif
Category: A FRAME DRAWINGS
DESCRIPTION: This engineering drawing shows a wrench designed to fit a filler neck. It details the construction and dimensions of the wrench, which appears to be made from steel rod and bar. The drawing includes specifications for materials and manufacturing.
DRAWING NUMBERS:
73-3016
NS-1 73-5008
TITLE BLOCK:
COMPANY NAME: Stearman Aircraft Co.
LOCATION: Wichita, Kansas
DATES: 8-26-35, 9-3-35, 8-19-35
APPROVAL SIGNATURES: Appears to be "Nuti" for APP, and another illegible signature above it.
View Drawing
A FRAME DRAWINGS(347).tif
Category: A FRAME DRAWINGS
DESCRIPTION:
This engineering drawing depicts a "BEARING ASSEMBLY - FUEL COCK TORQUE TUBE FRONT" for a Stearman Aircraft. It shows a detailed view of a tube support with an oil hole, a tube-bearing, and a tube clamp. Dimensions and specifications for these components are provided.
DRAWING NUMBERS:
75-3134
57-180-2
PT-13 75-3100
TITLE BLOCK:
Company Name: STEARMAN AIRCRAFT CO.
Location: WICHITA, KANSAS
Dates: 10-14-35, 1-28-36, 10-14-35 (multiple instances of dates related to drafting and check
View Drawing
B FRAME DRAWINGS(155).tif
Category: B FRAME DRAWINGS
1. Description:
This is an engineering drawing for a control clutch rod assembly used in a Boeing-Stearman biplane. It details the rod itself, a handle, and a nut. The drawing shows dimensions, material specifications, and manufacturing notes for the components.
2. Drawing Numbers:
76C3-2808
73 2813
AN 315 3R
3. Title Block:
Company Name: STEARMAN AIRCRAFT CO.
Location: WICHITA, KANSAS
Dates: 12-22-36, 12-23-36, 12-24-36
Approval Signatures: M. MCFADDEN, MED, R.C.
Sheet Information: Sheet 1 of
View Drawing
A FRAME DRAWINGS(111).tif
Category: A FRAME DRAWINGS
1. **Description**: This engineering drawing depicts a "PIN - TAIL WHEEL LOCKING" for a Boeing-Stearman aircraft. It details the physical dimensions, threading, and specific features of the pin, including a tapered end designed to mate with a hole in cylinder 73-2769. The drawing also includes material specifications and a revision history.
2. **Drawing Numbers**: 73-2771, NS-1 73-2788, 73-2769
3. **Title Block**:
* **Company Name**: STEARMAN AIRCRAFT CO.
* **Location**: WICHITA, KANSA
View Drawing
A FRAME DRAWINGS(506).tif
Category: A FRAME DRAWINGS
1. **Description**: This engineering drawing details a single part, a bolt, and specifies that it should be made from a part designated as AN-23-8. It also indicates that this bolt is part of the "BOLT - STARTER CLUTCH CONTROL" assembly. The drawing includes dimensional information for the bolt.
2. **Drawing Numbers**:
* A75NI-2825
* AN-23-8
* A75NI-2637
* A75NI-2500
* N2S-4
* A75NI-2637
* PT21
* A75NI-2637
* PT-17
* A75NI-2500
*
View Drawing